|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#2
12-27-2012, 02:08 PM
|
||||
|
||||
|
yeap, they are...
|
|
#3
12-27-2012, 02:28 PM
|
||||
|
||||
|
Have you checked to see if the bulbs are burnt out?
Question for the forum: The e53s with the pano roof...their rear lights are located on the side above the windows near the coat hanger/hooks...are the regular & no sunroof models rear lights located in the center of the headliner?
__________________
Become a BMW CCA member! Click HERE to join and feel free to use my BMW CCA member #191509 as a referral.
|
|
#4
12-27-2012, 02:47 PM
|
||||
|
||||
|
i have two E53s, one with regular sunroof, and the other one is with pano... regular sunroof has the rear light in the center, along with the rear seatback buttons, on the pano - everything is to the sides...
|
|
#5
12-27-2012, 02:56 PM
|
||||
|
||||
|
Thanks...you've added info to my mental rolodex.
__________________
Become a BMW CCA member! Click HERE to join and feel free to use my BMW CCA member #191509 as a referral.
|
|
#7
12-27-2012, 04:56 PM
|
||||
|
||||
|
Since the "spaghetti" WDS site is still down...here's a link to another online BMW WDS site...all the wiring diagrams for your BMW that you'll ever need.
__________________
Become a BMW CCA member! Click HERE to join and feel free to use my BMW CCA member #191509 as a referral.
|
|
#8
12-28-2012, 12:44 AM
|
|||
|
|||
|
Any idea what the different wires going into this connector are? I believe this is from the light control module (thanks to Qsilver7) but I am unsure what each wire carries in terms of a signal. Trying to figure out how to install an Alpine PKG-RSE2 and looking for the wire that represents the door so that when I open it it will turn on the built-in LED's of the Alpine overhead DVD player. Right now I am stumped. Here is the connector:
Last edited by spikeit; 12-28-2012 at 12:58 AM.
|
|
#10
12-28-2012, 12:11 PM
|
||||
|
||||
|
this is the problem with aftermarket devices and BMWs - the BMW does not use dry contact to monitor door status, it is using Hall Effect sensor to report to door module, that sends an iBus telegram to GM module that commands the LCM module to react in certain way.
you need to intercept that signal, let the relay take over the door contact wire and take it from there...
|
|
| Bookmarks |
|
|
|
|
Linear Mode
