CV Boot DIY procedure questions

		Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
CV Boot DIY procedure questions

Xoutpost server transfer and maintenance is occurring....

Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management

LinkBack

Thread Tools

Display Modes

02-05-2013, 07:17 PM

amacman

Member

Join Date: May 2008

Location: glasgow,scotland

Posts: 1,462

Quote:

Originally Posted by stevekat

I used a rotary hammer drill in hammer only mode to push the axle out of the hub using a bull point chisel. Worked very well.

When I replaced my axles (rather than the outer boots) just removed the lower control arm from the chassis.

What he said .
The axle will release eventually with some WD40 and gentle persuasion .
Best to read the diy write up for more info .

http://www.xoutpost.com/bmw-sav-foru...0-minutes.html

__________________
Artificial intelligence is no match for real stupidity

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Contact Us - Xoutpost - Sponsors - Archive - Top

All times are GMT -4. The time now is 08:06 AM.

© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.