Headlight lense removed, now how to get projector bowl out?

[danielsan]

Originally Posted by Tymatk

Lucky i was prepared.

What is that lever thing? Where should i set it? there are only 2 setting anyway.

It's to create a flat cut-off pattern. Leave it in the down position.

Your headlights would be (i hope) to suit our RHD traffic this lever makes the cut-off flat so you can also drive with LHD traffic. It's really only useful in Europe.

[Tymatk]

Cheers, it is RHD, thanks.

[X5SND]

While you have them apart, Order up a set of clear lenses for the projectors...they're only 40 bucks, but combine them with the fresh bowls the results will be night and day. (no pun intended).

You have them all apart anyway, so The majority of work is already done!

(3") ZKW-R - Clear Lenses from The Retrofit Source Inc

[Tymatk]

Originally Posted by X5SND

While you have them apart, Order up a set of clear lenses for the projectors...they're only 40 bucks, but combine them with the freshly chromed bowls the results will be night and day. (no pun intended).

You have them all apart anyway, so The majority of work is already done!

(3") ZKW-R - Clear Lenses from The Retrofit Source Inc

Wow, $42 shipping is way too stiff .