25w Cree Led has just arrive. Guess what?

[pap smear]

how are the lights holding up? I ordered mine and they should be here by the end of the week

[Christiano]

Originally Posted by pap smear

how are the lights holding up? I ordered mine and they should be here by the end of the week

So far so good.
I tried to use with one resistor at each side and Its working good so far. I asked the seller about it (why 2 resistors??) and he said to try one and check the OBC for errors. If "check park lights" appears, plug the second resistor too.
The good news is no errors with one or two resistors, no problem.

Chris

[Sweep_the_Leg]

Originally Posted by Christiano

So far so good.
I tried to use with one resistor at each side and Its working good so far. I asked the seller about it (why 2 resistors??) and he said to try one and check the OBC for errors. If "check park lights" appears, plug the second resistor too.
The good news is no errors with one or two resistors, no problem.

Chris

Do you still have it all stuffed inside the AE housing itself? Or have you moved it somewhere outside? Any heat issues?

[Christiano]

Originally Posted by Sweep_the_Leg

Do you still have it all stuffed inside the AE housing itself? Or have you moved it somewhere outside? Any heat issues?

Yes, inside. No problem with heat after almost 600 mile trip.
But Its fair to know that a wire cracked a little bit, close to main connector. A 3M tape solved the problem.

Chris