Front Control arm bushing change to Powerflex done in the driveway!

[wallyx5]

I did mine in the driveway as well. So far they have been excellent.

[BigBlack48is]

Originally Posted by wallyx5

I did mine in the driveway as well. So far they have been excellent.

So how far did you get on the original ones and how far have you gone on the PF's?

[knucklebuster]

When you decide to do the rear bushings lmk as I'm considering doing mine also .I'll split the cost of renting the tool

[BigBlack48is]

Originally Posted by knucklebuster

When you decide to do the rear bushings lmk as I'm considering doing mine also .I'll split the cost of renting the tool

Are you referring to the SF bushing's on the rear? I am actually kicking around the idea of making my own press for those too... Found a writeup that someone did for the 5 series and how they used a piece of threaded rod, 1" bar stock, washers and nuts to get it done

I am also going to change out the ball joints on the rear as I am sure they are worn out and it shouldn't be that bad of a job.

What area are you in?