BMW Scanner 1.4.0 PA soft review

[ake53]

hello everyone.
I have been using my Romanian software, and it is great but sometimes takes a while to load up. So i decided to the buy the next thing "bmw scanner 1.4.0"
-in hopes of getting rid of cluster dot, sync ike.
-easy coding
-fast diagnostics

-well the only thing i was able to code was the euro emergency lights. (double blink)
-key in ignition gong
-dash messages such as key in ignition, fasten seat belts disabled.

*no matter what i tried to disable the red seat belt indicator it would get rid of the light but throw a srs light. So its best to mess with srs settings.

so far, that's all i found, there's no way to easy program windows to continuous close with open windows or close all with key fob.

Will update once I find out more.
cost of cable with download link software from china $40, the original is 650+

[X5SND]

What is the double blink listed under/as?

The close windows via key is there...it's in the 'central body electronic' module I think, I did it on mine with the same software.

[Ricky Bobby]

In NCSExpert its under WARNBLINKER ..... change einfachimpuls to doppelimpuls

[X5SND]

^^ You're really going to make me get NCS up and running aren't you?

[Ricky Bobby]

Originally Posted by X5SND

^^ You're really going to make me get NCS up and running aren't you?

Lol I have read Terminator and Slick's threads so much on the topic that I start to memorize the coding lines. It's sad!

[ake53]

DOUBLE BLINK was in lcm i think. need to check and I had all the options checked before i got to it for opening and closing windows.

we need to start a dedicated thread for this :P

[X5SND]

Originally Posted by ake53

DOUBLE BLINK was in lcm i think. need to check and I had all the options checked before i got to it for opening and closing windows.

we need to start a dedicated thread for this :P

Luckily majority of the options (except a small few) are in English, so it's not that bad. I would suspect someone wanting to do higher level functions would take the time to become (if they aren't already) proficient with something like ncs or a gt1.

One of the other major BMW forums (forgive me, but I don't recall off hand which one) already has a huge thread on this program....should be relatively easy to find though!

[TerminatorX5]

NCS expert is relatively easy.. just program one module at a time, it does have ability to "program" all at once but works selectively... when you do individual modules, you can see the results right away...

the windows roll up/down when the door is open - FH_TIPP_DISABLE_TUER_AUF - nicht_activ
windows/sunroof close on remote - KOMFORTSCHLIESSUNG_FB - activ
high beams on with bi-xenon - PWM_FL_BIX - wert_01
doors auto lock - VERRIEGELN_AUT_AB_X_KM/H - activ; VERRIEGELN-XKM/H_SENDER_1 - activ; VERRIEGELN-XKM/H_SENDER_2 - activ; VERRIEGELN-XKM/H_SENDER_3 - activ; VERRIEGELN-XKM/H_SENDER_4 - activ; VERRIEGELUNGSSCHWELLE - 16_KM/H
steering wheel tilt upon entry - EINSTIEGSHILFE_HOEHE - activ
steering wheel extend upon entry - EINSTIEGSHILFE_LAENGE - activ
drivers seat into position upon entry - AUT_SITZVERSTELLUNG - activ
cold monitoring off for license plate lights KENNZEICHENLI_PRUEF - nicht_melden; CC_MELDUNG_KZL - nicht_activ; KALTUEBERWACHUNG_KZL - nicht_activ
folow me home xenons (to preserve the life of HID bulb) - HEIMLEUCHTEN_AL - nicht_activ
fogs simultaneous with high beams - FL_UND_NSW_NICHT_GLEICHZ - nicht_activ
gong off for key left in ignition - ZUENDSCHLUESSEL_WARNUNG - nicht_activ
gong off for seat belt (warning is still in the cluster) - GURTWARNUNG_GONG - nicht_activ
Car clock synchronized to GPS time beacon - GPS_UHR - activ
front turn signals are off as side markers - KEINE_PARKLICHT_FUNKT - activ (or you can keep default - nicht_activ); BLK_V_GED_ALS_PARKLICHT - nicht_activ
sunroof autoclose on rain sensor - REGENSCHLIESSEN - activ; REGENSCHLIESSENTILT - activ
cold monitoring off for Angel Eyes - KALTUEBERWACHUNG_SL_LV - nicht-activ; KALTUEBERWACHUNG_SL_RV - nicht-activ
single push of remote to unlock all doors - ZV_SELECTIV - nicht_activ

[ake53]

Originally Posted by TerminatorX5

NCS expert is relatively easy.. just program one module at a time, it does have ability to "program" all at once but works selectively... when you do individual modules, you can see the results right away...

the windows roll up/down when the door is open - FH_TIPP_DISABLE_TUER_AUF - nicht_activ
windows/sunroof close on remote - KOMFORTSCHLIESSUNG_FB - activ
high beams on with bi-xenon - PWM_FL_BIX - wert_01
doors auto lock - VERRIEGELN_AUT_AB_X_KM/H - activ; VERRIEGELN-XKM/H_SENDER_1 - activ; VERRIEGELN-XKM/H_SENDER_2 - activ; VERRIEGELN-XKM/H_SENDER_3 - activ; VERRIEGELN-XKM/H_SENDER_4 - activ; VERRIEGELUNGSSCHWELLE - 16_KM/H
steering wheel tilt upon entry - EINSTIEGSHILFE_HOEHE - activ
steering wheel extend upon entry - EINSTIEGSHILFE_LAENGE - activ
drivers seat into position upon entry - AUT_SITZVERSTELLUNG - activ
cold monitoring off for license plate lights KENNZEICHENLI_PRUEF - nicht_melden; CC_MELDUNG_KZL - nicht_activ; KALTUEBERWACHUNG_KZL - nicht_activ
folow me home xenons (to preserve the life of HID bulb) - HEIMLEUCHTEN_AL - nicht_activ
fogs simultaneous with high beams - FL_UND_NSW_NICHT_GLEICHZ - nicht_activ
gong off for key left in ignition - ZUENDSCHLUESSEL_WARNUNG - nicht_activ
gong off for seat belt (warning is still in the cluster) - GURTWARNUNG_GONG - nicht_activ
Car clock synchronized to GPS time beacon - GPS_UHR - activ
front turn signals are off as side markers - KEINE_PARKLICHT_FUNKT - activ (or you can keep default - nicht_activ); BLK_V_GED_ALS_PARKLICHT - nicht_activ
sunroof autoclose on rain sensor - REGENSCHLIESSEN - activ; REGENSCHLIESSENTILT - activ
cold monitoring off for Angel Eyes - KALTUEBERWACHUNG_SL_LV - nicht-activ; KALTUEBERWACHUNG_SL_RV - nicht-activ
single push of remote to unlock all doors - ZV_SELECTIV - nicht_activ

you should do a nice write-up or pm me how to

[CrazyOneToo]

Originally Posted by TerminatorX5

NCS expert is relatively easy..

1 front turn signals are off as side markers - KEINE_PARKLICHT_FUNKT - activ (or you can keep default - nicht_activ); BLK_V_GED_ALS_PARKLICHT - nicht_activ

2 sunroof autoclose on rain sensor - REGENSCHLIESSEN - activ; REGENSCHLIESSENTILT - activ

3 single push of remote to unlock all doors - ZV_SELECTIV - nicht_activ

Can these also be done by BMW Scanner 1.4.0???

What does 1 change? The sunroof autoclose sounds like a good idea.
Not sure if I'd want the all door unlock option on.
If I am the only one getting in its an over use of the lock devices.
Thanks



-