LCM3 vs, LCM4

[fmugur]

Originally Posted by Rev Engineer

fmugur - On another forum you mentioned that you encountered a problem with the RLS readings all being maxed out. Did you figure out what the problem was??

I had RLS working in the x5 and then it stopped working after a LCM recode (to shut off some annoying cluster messages) and now the RLS values are all maxed out. Not sure if the RLS breaking and the LCM coding are completely related.. As a quick test, I pulled the RLS out of my 530i and it works in the x5. Just need to figure out why the RLS readings won't go back to normal.

I tried this last year before the winter and I supposed to complete it this summer but I sold the car.
On the RLS I managed to get the autolights to work and the rain sensing was giving me the same trouble.
I got two RLS sensors and both the first time installed on the car were showing the right values in inpa. After the initialization I lost these values. Unfortunately you have to initialize it to read the new glue/windshield light deflection.

I ended up enabling in the GM3 module as in temporary option :

WISCHERPOTI ( WINDSCREEN WIPERS POTENTIOMETER TIMING ) - aktiv

but this is not going to use the sensor.
Check champaign777 user on the e46 forum for more details.
Post back here also your progress and I will try to help although I haven't completed this project.