spyder taillights brake warning

[blackx]

That's the driver side. I matched that up. How bout the pass side?

[powers1]

Originally Posted by blackx

That's the driver side. I matched that up. How bout the pass side?

If your left side is the same as mine,then does it work?If it doesnt ,then its an issue with the spyder tail lights and not the connection.
If the left matches ,so will the right...no ,I dont have a pic for the right side !

[blackx]

Not sure how the wires will matchup when on drver side different plugs being pulled then the passengerbside. Incontact with dt moto hoping they will replace them

[powers1]

http://www.xoutpost.com/bmw-sav-foru...-lights-2.html

Have a read on above link......Someone with a 2001 and similar issue,but his connectors seem different to yours.
If you check my posts in that thread,you know that the 2001 harness is same as facelift X5s,unlike mine.

[blackx]

sent them back. ill update when the new ones come in next week. although im getting the error now again when i plugged in my oem tails

[pezho405]

Originally Posted by blackx

sent them back. ill update when the new ones come in next week. although im getting the error now again when i plugged in my oem tails

hmmm i might have missed it but is the warning for a bulb out? "check taillight bulb" or is it an actuall brake warning? maybe it just happend coincedentially that a brake sensor or something went bad or came loose?

[blackx]

thanks for everyones help. New LED's are now on and really updates the back end . switched plugs 1 to 3 and 6 to 4 . no errors