Quote:
Originally Posted by addiction
Well I rebuilt the trans today. Sorry no pics. Camera was dead. Thank you civd for the pointers. As was expected. The oring in the a drum was broken. The rest of trans looked great. I did replace the b hub axial bearing as it looked very worn. It wasn't broken but I could tell the race was very worn. Paper thin. I used Valvoline oil that specified for our trans. It was that at 6.00 vs Royal Purple 15.00 a quart. Used a total of 8 qrts. I did drain as much fluid out if the torque converter as I could. I can only assume there was still a qrt in there. I started at 7am and was done 7pm today with the help of and old friend. Thanks again for the pointers. It runs great. Time will only tell how well I did.
|
Ok, so let me get this straight, you spent 12 hours wrestling with the transmission rebuild and then you throw in some generic fluid that Valvoline says is ok (but it doesn't meet the ZF specs or it would have said it meets them). "No bartender, I don't care what's in my drink, just pour in that equivalent stuff..." 
I don't get it. ZF Lifeguard oil is available from online vendors (I got mine from the California Transmission Supply Company). Why put in generic oil after all that work? 
__________________
Kirk
Las Vegas
2016 X5 40e Mineral White/Black Dakota Leather, ZLL, ZCW, ZDA, ZDB, ZPP, multi contour seats, rear side window shades, HK stereo
2011 E90M3, 6-speed manual
|
08-09-2013, 01:29 AM
Threaded Mode
