Is This window Regulator Toast?

[romeokc10]

Hey guys, well I finally had a window failure happen to me, after I took the door panel apart it looks like both ends of the cable came off. They only broken part I see is the guide rail window clip, you can see it's cracked in half in the pic. The other clip that usually breaks is ok, but I'll replace it since I have everything apart. So what do you guys think, is the motor/regulator salvageable if I re-thread the cable or should I just replace it? The last pic I found this in the bottom of the door, anybody know where it goes?

[TwinTurboGTR]

The motor is ok, but the reg is shot. The cable in crimped in a few places which will hinder the performance of the regulator when the cable is wound on the wheel. I would replace it. As for the last plastic piece, looks like one opf the pins for the door card that go around the edges of the door.

[TerminatorX5]

TT is absolutely correct!!!!

[romeokc10]

Cool, thanks guys, I'll get a new regulator and replace the black window clips while I'm in there.