|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#11
10-21-2013, 04:44 PM
|
|||
|
|||
|
__________________
2005 E53 X5 post facelift 
|
| Sponsored Links | |
|
|
|
|
#12
10-21-2013, 05:12 PM
|
||||
|
||||
|
The piece you need looks like this (rectangle):
Its a holder for the sensor, and snaps onto the backside of the bumper. To change this piece, the bumper has to come off. Now for the bad news....it appears these pieces are sold as part of the bumper.
__________________
2004 X5 3.0i Mod list: Currently Longer than the maximum allowed characters that can be typed here... 
|
|
#13
10-21-2013, 05:39 PM
|
|||
|
|||
|
Omg. I can't believe u can't buy it separate
 Just looked on eBay. Isn't isn't that part is it? Look at this on eBay: Parking Sensor Mount for BMW Audi E39 E46 X3 X5 E38 E53 PDC Sensor Holder New http://bit.ly/H6X4fV
__________________
2005 E53 X5 post facelift
|
|
#14
10-21-2013, 05:52 PM
|
|||
|
|||
|
Yes the pic looks like my sensor see pic
__________________
2005 E53 X5 post facelift
|
|
#15
10-21-2013, 06:05 PM
|
||||
|
||||
|
I can' find a BMW part number that is like the picture X5SND provided. I did find this version but it has no square backing. If it comes with the bumper I would go certainly go with the ebay part or check with a local salvage yard. I have purchased aftermarket parts that used 3M self adhesive and they have been just fine. Home Page Search SiteSearch 51128408391 - ECS Tuning Inc
__________________
 X5 4.6 2002 Black Sap, Black interior. 2013 X5M Melbourne Red, Bamboo interiorDallas
|
|
#16
10-22-2013, 09:05 AM
|
||||
|
||||
|
That eBay piece may fit with some trimming...but if you look closely at the face area around the sensor on the pic I posted vs the area on the piece from eBay, you should see there are some differences. For £5 it's a quick fix....but it'll look like the band-aid solution it is.
__________________
2004 X5 3.0i Mod list: Currently Longer than the maximum allowed characters that can be typed here...
|
|
#17
10-22-2013, 12:27 PM
|
||||
|
||||
|
Quote:
Might be good idea to check with BMW dealer and confirm there is no replacement part. Since it is removable, I would think there either was or is what you need.
__________________
X5 4.6 2002 Black Sap, Black interior. 2013 X5M Melbourne Red, Bamboo interiorDallas
|
|
#18
10-22-2013, 05:18 PM
|
||||
|
||||
|
Look at the ~1/8 in. outside diameter surrounding the sensor on the pic the OP posted (damaged bit). That bit is raised from the surface of the sensor holding plate so that when the piece is attached to the backside of the bumper, the front sits flush with the face of the bumper. Since the ebay piece does not carry the raised portion, it will appear to be recessed ~1/16" or whatever the thickness of the bumper is.
I concur that heading to the local dealer may be beneficial in this case....they may be able to see something we missed!
__________________
2004 X5 3.0i Mod list: Currently Longer than the maximum allowed characters that can be typed here...
|
|
#19
10-23-2013, 02:25 PM
|
||||
|
||||
|
I figured the either the picture was misleading or the just a different design that still fits--
Since fender benders that would take out parking sensors would not be that unusual, I suspect that part is available from BMW or one of the other sensors is a retrofit.
__________________
X5 4.6 2002 Black Sap, Black interior. 2013 X5M Melbourne Red, Bamboo interiorDallas
|
|
#20
10-23-2013, 02:26 PM
|
|||
|
|||
|
guys does this look like right part? found another ebay link ..BMW E53 X5 PDC SENSOR ULTRASONIC FRONT PARKING DISTANCE CONTROL 66216938739 | eBay
__________________
2005 E53 X5 post facelift
|
|
| Bookmarks |
|
|
|
|
Linear Mode
