|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
03-10-2014, 09:55 AM
|
|||
|
|||
|
so i have replaced my two front o2 sensors and cleaned MAF. I am still getting the P0141 sensor 1 bank 2 error now
all other codes seem to have gone away running too lean , misfires etc... so far so good knock on wood I guess i should check the disa valve next or move on to rear sensors? car has 124k on it and plugs were done at 98k and i replaced valve cover gasket at 110k 
|
|
#2
03-10-2014, 12:51 PM
|
||||
|
||||
|
If it helps, my issue turned out to be that one of the hoses going into the PCV valve had come loose. So check the DISA for sure, but if it looks OK, I would start checking for vacuum leaks under the intake.
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
