SOLVED - Mid will not power after re-locating

[bugbyte]

So the radio built into the mid? My plan was to move the mid into the glove box so I have the room to install my nexus 7 and use the aux to send audio to dip amp. I was in the hurry so after removed the mid, took the connector out, the I cut the 5 wires at the same time (stupid decision). After extended the wires long enough to reach to the glove box, i then double check all the 5 wires and connected the mid, turned the key, hit the power button but it didn't turn on. The center player still accept and eject the cd. There must be a fuse somewhere that blew up while I cut the wires. I will connect the scanner and check for the mid module tomorrow.