|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#11
03-13-2014, 08:04 PM
|
|||
|
|||
|
Spent a little time pulling off hoses and such to get ready to degrease this thing.
Some of these pics are mostly for my own benefit during re-assembly.  Coolant line to the back of engine  low pressure oil line from oil filter  Next I covered all openings with baggies and rubber bands.  Should I pull the coils before I spray this thing with degreaser and hose it down?   If it warms up some tomorrow, I plan to lift the engine/tranny from the sub-frame and steering rack and clean it up outside. Anything else I should remove that doesn't take kindly to degrease and water? I figured I refrain from using the power washer on it, and I plan to dry it with compressed air once I'm done.
__________________
2018 Honda Accord Touring 2.0t - 44k 2015 Honda CR-V EX-L - 82k 2002 X5 4.6is - 133K 2002 Chevy 3500 4x4 LT CC LB - 110k 1998 Subaru Legacy GT 5 speed - 144k 2002 4 Runner Limited - Sold 2006 E60 M5 - Sold 2000 Corvette - Sold 1994 Infinity Q45t - Sold 1982 F150 4x4 - Sold 
|
| Bookmarks |
|
|
|
|
Threaded Mode
