|
No way a test strip dipped into the master cyl reservoir is showing condition of brake fluid in the calipers.
Any moisture in the system will collect at the lowest point (calipers/lines), because of the different specific gravity between brake fluid and water.
An incomplete flush can leave old "wet" fluid in the ABS module/lines/calipers and the test strip will ONLY verify the dry/new fluid on top.
Moisture test strips only work to verify fluid moisture in a system that circulates the fluid, automotive hydraulic brake systems compress the fluid, ZERO circulation.
__________________
'03 X5 4.4 Sport, last of the M62s (8-03 build date)
I believe in deadication to craftmanship in a world of mediocrity!
|
03-17-2014, 12:05 PM
Threaded Mode
