|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
03-23-2014, 02:25 PM
|
||||
|
||||
|
Tight Steering
When turning it sometimes (usually) has tight spots. Anyone experienced this? I just don't want the shaft to snap going 80mph, if that is even possible. Thanks for the help. 
__________________
740iLDUKE 01' DINAN 7 S62 Swap - Stratus Grau (1587 produced in SG 440) 02' 4.6is DINAN X5 S2 Supercharged 833/3258 produced | 1/27 Dinan X5's 
|
| Sponsored Links | |
|
|
|
|
#2
03-23-2014, 02:38 PM
|
|||
|
|||
|
Its that joint in the steering shaft. Try lubing it up with lithium grease first. Could be rack, but that joint will be almost free to try and lube up.
__________________
2006 4.8is, Black on White. SOLD Sniff Sniff. 2017 F85 x5m, Black on Red. BEAST MODE "The older we grow the greater becomes our wonder at how much ignorance one can contain without bursting one's clothes." - Mark Twain Unlock OBC post 5
|
|
#4
03-23-2014, 03:19 PM
|
||||
|
||||
|
Yeah, I think the shaft is bad/worn out. Im assuming this is typical? Since it has the tight spots in it, im thinking that its the knuckles in the u-joints in the shaft. It got a tiny bit better after soaking it with lithium grease.
__________________
740iLDUKE 01' DINAN 7 S62 Swap - Stratus Grau (1587 produced in SG 440) 02' 4.6is DINAN X5 S2 Supercharged 833/3258 produced | 1/27 Dinan X5's
|
|
#5
03-24-2014, 01:20 AM
|
|||
|
|||
|
Yea a few people here had this issue. It gets gunked up and fails. My bus has a 3.0 and its also shot.
__________________
2006 4.8is, Black on White. SOLD Sniff Sniff. 2017 F85 x5m, Black on Red. BEAST MODE "The older we grow the greater becomes our wonder at how much ignorance one can contain without bursting one's clothes." - Mark Twain Unlock OBC post 5
|
|
#6
03-24-2014, 06:33 AM
|
|||
|
|||
|
We have a member here from the middle east that had the same problem, he solved it by replacing the steering shaft u-joint. Posted photos too.
I replaced mine as well but because it was loose, not tight. Straight line stability improved greatly!
__________________
04 X5 3.0i auto 03 X5 4.6is
|
|
#7
03-24-2014, 06:34 AM
|
|||
|
|||
|
__________________
04 X5 3.0i auto 03 X5 4.6is
|
|
| Bookmarks |
|
|
|
|
Linear Mode
