|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
02-22-2014, 07:18 PM
|
|||
|
|||
|
5651 Rough idle speed controller
Just connected connected up my new ebay diagnostics and ran the INPA on my 2002, 3.0 Diesel sport. The following error was picked up :- ECU: DDE40KW0 5651 Rough idle speed controller Error registration 0x1613 Error Code 16 13 28 01 74 01 19 7A 1D 77 54 DE 00 00 00 00 Can anyone shed anylight on the error, it does seem to idle poorly.... Cheers G 
|
| Sponsored Links | |
|
|
|
|
#2
03-05-2014, 11:37 AM
|
|||
|
|||
|
These are the additional abbreviated codes that have been picked up using INPA....
Any suggestions.... Cheers Gary Variant DDE40KW0 5651 Rough Idle speed Controller Error Freq 10 Logistic counter 39 Error present sporadic error Correction amount too big Error Code: 16 13 27 0A 7C 01 19 8D 1D 77 55 22 01 1A 9C 18 77 55 2F 01 1A A4 17 76 55 13573 glow device Error freq 1 Logistic counter 40 Error present Glow system – glow plug or glow plug relay 35 05 28 01 74 80 00 43 49 00 55 22 1028 EGR control Error frequency 10 Logistic couner 39 Error present Sporadic error Ne deviation / air mass to big Code: 04 04 27 0A 7C 20 58 B4 2C 73 55 24 20 58 B9 36 83 55 27 20 59 B7 29 76 55
|
|
#4
03-16-2014, 02:07 PM
|
|||
|
|||
|
Hi
I took the acoustic cover off the engine today to take a look at the injectors.... there seems to be quite a lot of diesel fuel at the base of the injectors...not sure if this is coming from one or more than one... Could this leakback be casuing the error messages that I have posted ? Is it likely that the rubber seals have failed.... is it worth replacing those on all injectors first to see if this resolves the rough idle ? If so is there a how to replace the diesel o rings any where ?? Cheers Gary
|
|
#5
03-27-2014, 02:15 PM
|
|||
|
|||
|
Just an update...
INPA and DIS indicated injector 1 not working correctly. Took in to a diesel engineer GT Diesels in Dundalk, Co Louth.... They identified that injector 1 did not match the others and was puming out too much fuel......they changed the nozzle and reset....now its runnning smooth and no error codes (well at least related to the engine !) Gary
|
|
| Bookmarks |
|
|
|
|
Linear Mode
