Service Symbol

[Qsilver7]

Originally Posted by sv1cec

OK, I did my oil change and brake fluid change a few days ago, and now I want to reset my lights. I did as Qsilver7 suggested but the procedure in post #4 doesn't show any Reset or Res. It shows "test" and then several options, 1.0, 1.1 up to 1.7, then 2.0 (where all the lights on the dashboard light up, like a Christmas tree) etc.

Is there a different procedure for this dashboard?

The quote above indicated "operator error". If you're seeing TEST...then that means you're pressing the right button (which is the Check Control button)....and your initiating the 21 OBC TESTs (if your cluster is UNLOCKED)...or just TESTs 1, 2, & 19 if your cluster is LOCKED.

To initiate the SI display reset...the instructions say to press the "TRIP METER BUTTON" (which is the trip odometer reset button)...which is the LEFT button on the instrument cluster.

Try it again, except this time, initiate by pressing & holding the LEFT cluster button while turning the ignition to POSITION 1 (not position 2 or higher).