|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
05-09-2014, 10:49 AM
|
|||
|
|||
|
Confusion on lowering links
Just have a question about lowering links. Will installing 4 lowering links work on this set up w/o causing a suspension inactive light and be able to be aligned properly? I Don't want bad tire wear or want to slam it. Just drop it and inch to take out some wheel gap. Thanks! Sent from my iPhone using Tapatalk 
|
| Sponsored Links | |
|
|
|
|
#2
05-09-2014, 03:06 PM
|
||||
|
||||
|
Lowering links is to fool the computer into lower the ride height. You can not use it to lower the front sine they are springs and struts combo.
You will need to put on the lowering springs, and if I were you, I would skip the lowering spring and just have it coded to lower the rear. Bad tire wear (inner?) is caused by toe-in setting more than negative camber.
__________________
 00 E39 DINAN S1 //M5 (82k miles) 06 E53 DINAN 4.8iS, born 2/18/2006 (126k miles) http://www.xoutpost.com/bmw-sav-foru...s-my-dslr.html 90 Straman Z32 TwinTurbo Convertible, (1 of 44 ever made) 5 speed, 444rwhp/451rwtq 01 360 Novitec Spider F1 (26k miles)
|
|
#3
05-09-2014, 03:22 PM
|
||||
|
||||
|
I went the H&R lowering kit route. It was no problem to get it aligned within specs. Pictures are in my album.
The following may be of help: http://www.xoutpost.com/bmw-sav-foru...lots-pics.html
__________________
 X5 4.6 2002 Black Sap, Black interior. 2013 X5M Melbourne Red, Bamboo interiorDallas
|
|
| Bookmarks |
|
|
|
|
Linear Mode
