AC Not working, clutch not engaging, Solar Sensor errors on BMW Scanner 1.4

[diddy0071]

Well I'm caving and taking it to my local indy for an inspection. Once they tell me what the issue is, I will do the work myself. Thanks for the help.

[upallnight]

Originally Posted by diddy0071

I posted a link to the ebay page of what the coil looks like. No cables or anything attached to it.

The cable is located behind the coil, which the seller didn't provide. Looks like he is selling the complete clutch and pulley and coil. Not a bad price.

[diddy0071]

Originally Posted by upallnight

The cable is located behind the coil, which the seller didn't provide. Looks like he is selling the complete clutch and pulley and coil. Not a bad price.

SO then I don't need to plug in any cables, just swap the pulley and coil?

Anyways, I emailed another indy that I used to do work with (30 miles away, that is why i don't visit him anymore) and he tells me the aux fan could be a culprit again. He said that since I got it done 2 years ago (or less than) I should have warranty. I'm looking for that invoice from 2 years ago to get the warranty to replace.

[upallnight]

Originally Posted by diddy0071

SO then I don't need to plug in any cables, just swap the pulley and coil?

Anyways, I emailed another indy that I used to do work with (30 miles away, that is why i don't visit him anymore) and he tells me the aux fan could be a culprit again. He said that since I got it done 2 years ago (or less than) I should have warranty. I'm looking for that invoice from 2 years ago to get the warranty to replace.

You still have to plug in the wire from the harness to the compressor. The cable/connector for the coil should already on the new coil. If the fan was at fault you should have an error code when you scanned it.