|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
05-30-2014, 04:50 PM
|
|||
|
|||
|
Just scanned my X5, need advice with a few fault
Just got my BMW scanner running and after fixing AUX Fan and cooling overhaul, decide to rescan the X. Got the following messages... I sometimes experience some type of vibration during acceleration, engine at idle is smooth. Everything seems fine except for the vibration... I am still trying to figure what to do. Please help if you have any insight.
In my DME Details, I have the following fault code 5A[090] Exhaust temperature before catalyst, bank 1, singal line, short circuit to negative 5B[091] Exhaust temperature before catalyst, bank 2, singal line, short circuit to negative 5D[093] Exhaust temperature after catalyst, bank 2, singal line, short circuit to negative 3F[063] Control unit self-test 3 53[083] Crankshaft sensor, no signal 3E[062] Solenoid valve, secondary air, short circuit to negative or open circuit Then from my VTG [ Transfer Box], which sounds more scarier 54C6[21702] Oil abrasion Thanks!
__________________
2004 3.0 X5 built 06/2004 Premium Pkg & Xenon Only First owner and 175K miles and counting First Major cooling overhaul in 5/2014 Sparks plugs, hose and water pump and tranny filter replaced at 90K Mobile 1 Synthetic all the way with Mann Filter 
|
| Bookmarks |
|
|
|
|
Threaded Mode
