|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
10-04-2014, 07:31 PM
|
|||
|
|||
dis help needed bad
got my gt-1 cable/software all is install i can read the codes in inpa or erase them but when i try dis i can read anything error about no connection and something about no enable adapter with ip 192.168.68found any help with this would be more than appreciated. thanks
__________________
4/02 x5 3.0i AUTO BLACK KISSIMMEE FL 
|
| Sponsored Links | |
|
|
|
|
#2
10-05-2014, 02:14 AM
|
||||
|
||||
|
Do you have ifhsrv32.exe running? Is API test passing? Actually to make it easier to help you, I'd suggest you mention what you did to setup DIS, if you configured it, how you're running it etc. This way it would be easier to pinpoint your issue or missteps and help you out!
Last edited by X5only; 10-05-2014 at 02:19 AM.
|
|
#3
10-05-2014, 06:24 AM
|
|||
|
|||
|
ok got it working here is what to do hope it helps other.
go to Start -> Run and type 'ncpa.cpl' without quotes and press enter, in the Network Connections window right click on Vmnet1 and select Properties, double click on 'Internet Protocol TCP/IP' or 'Internet Protocol v4' and check the box "Obtain an Ip address automatically" and click OK, do the same for VMnet8.
__________________
4/02 x5 3.0i AUTO BLACK KISSIMMEE FL Last edited by 1iwilly; 10-05-2014 at 10:46 AM.
|
|
#5
10-05-2014, 10:51 AM
|
|||
|
|||
|
now i just need info on how to reset adaptation for MAF suspect it might be on its way out
at start up reads 20kgh and warm idle 17kgh 39kgh at around 2500rpm
__________________
4/02 x5 3.0i AUTO BLACK KISSIMMEE FL
|
|
| Bookmarks |
|
|
|
|
Linear Mode
