Attention: Dipstick Guide Tube N62

[mr_robot]

The o-ring that meets the bottom half to the upper half if that fails would it cause an oil leak? Does the oil travel up that far when crankcase is pressurized?

I noticed while doing other stuff down there only the bottom half of the tube was wet with oil.

[Johnny_5]

Originally Posted by mr_robot

The o-ring that meets the bottom half to the upper half if that fails would it cause an oil leak? Does the oil travel up that far when crankcase is pressurized?

I noticed while doing other stuff down there only the bottom half of the tube was wet with oil.

If your talking about oring at the bottom near the pan yes. If your talking about the middle joining piece no. It’s possible it could be the valve cover gasket.