|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
12-26-2014, 02:34 AM
|
||||
|
||||
|
SOLVED: My PDC had gone missing?!
I was attempting to tap pin 7 on the middle connector for PDC as a trigger wire for a relay to turn on reverse camera. Got 12v out of it. Unplugged middle connector so I could splice wire in. Now my PDC won't work. No longer getting 12v on that wire anymore, and no light on PDC button anymore.
Checked fuse 6 on glove box (marked 'parking assist') , fuse is fine but swapped a new one in just in case. No change. Scanned with BMW Scanner 1.4.0 - showed PDC greyed out and 'module not found'. So I'm at a loss. Any help? Hoping I haven't fried the PDC module somehow - but not sure how I could test? Thanks in advance. SOLUTION: the middle connector was not fully seated after I had previously disconnected it from the PDC module. Make sure the connector is fully seated before you push the clip over. Sent from my iPhone using Tapatalk
__________________
2005 3.0d Sport - Sapphire Black Engine : Bluefin Superchip Tune, Wheels & Sus: Style 168s (10.5s all round), H&R RDA Spacers, Bilstein B12, Eibach 40mm drop, Whiteline RSB Exterior: Le Mans flares, 4.6is kit F&R Interior: Dynavin N6, Blackvue DR650 dash cams My Build Thread: http://www.xoutpost.com/bmw-sav-foru...run-sheet.html Last edited by SMOKEY53; 12-29-2014 at 09:00 AM. 
|
| Bookmarks |
|
|
|
|
Threaded Mode
