Service Lights

[Dark_stranger]

Guys, just had an Inspection II service on my car & was expecting the service lights to be fully reset to show a full service indicator bar (I think with green lights), but the bar has been reset, but the last 2 bars are missing. Should these be showing after an inspection II? If so, can I reset the service lights with a scanner 1.4 or IPNA\DIS, of which I have all.

[Qsilver7]

A reset should show 5 green LEDS...are you saying you only have 3 green LEDS illuminated? The 2 LEDS on the far right are the yellow LED & red LED which the owners manual says illuminates when an inspection or oil service is due (or overdue when the red one comes on).

[Qsilver7]

Again...it's not clear...do you have 3 or 5 green LEDs illuminated? There are a total of 7 LEDs...5 green, 1 yellow, & 1 red:

[Dark_stranger]

I have 5 green (although they look more yellow). I guess thats correct.

[Qsilver7]

If the 5 LEDs (starting from the left) are illuminated...then you're good to go. They will turn off as you reach the consumed fuel calculation for your engine/model. Then when it's time for the next oil service/inspection (that's if you are following the BMW schedule)...then the yellow (6th) LED will illuminate along with either oil serv or inspection. Then if you continue to drive without resetting, the red (7th) LED will illuminate.

Sounds like you're good to go.