First Batch of problems... opinions needed

[bgsquad]

So I officially entered the E70 world...

I have so far the following symptoms that worry me:

1- When parked, i turn it on, release the hand brake and put it in D... and Bang! I hear a loud clunk! is that normal? I tried applying the parking break and then put in in P, it makes it better, but still happens sometimes... anything to worry about?

2- now the puzzling part: yesterday, when coming to a stop, the engine shut off. it happened twice. it restarts just fine, and stores no codes. I took it to the shop, where they cleaned the throttle body for me. after cleaning it, it was on idle (still at the shop) it shut off twice more. the mechanic said it was adapting to the new idle value. and that's it! i did not repeat since yesterday.

The shop does not have GT1/INPA, etc... so i pulled the codes using BMWhat. and below is the report. the codes are in HEX...

Can someone help me out here?


ID1: e2c96e12-c275-4112-a2df-05ffd60a20b8-861ID2: 8bf02027-66ea-44ab-9f98-7757414fc4bc-d1a-45b4
INFO: 080CCFBEAEA590876F674B362A21B6
Base: E70
Build-Year: 2008
Faults: 30
ECUs: 29
Model: X5 3.0 si alle/all (MotorID=92, Parameter=31)
Battery: 13.7V
Enhanced communication
Normal connection
normal
B 2
Date: 2015-05-11 15:13:28
OBDII
Version: 21
Device: >LGE< >g3_global_com< >LG-D855<
Motor Control:
Engine / Motor
ECU OK, no Fault Code
ABS / DSC / Brake:
Dynamische Stabilitaets Kontrolle / DSC
Fault: CAN fault
Code: 6F4E
Fault: Message
Code: 6F60
Fault: PT CAN fault
Code: D355
Fault: PT CAN fault
Code: D354
Fault: PT CAN fault
Code: D356
Fault: Message
Code: 6F56
Fault: Message
Code: 6DE6
Fault: Steering angle sensor
Code: 6EC4
Fault: PT CAN fault
Code: D35A
Fault: Wheel speed VR
Code: 6DA4
Hand brake / Feststellbremse (EMF)
ECU OK, no Fault Code
Airbag:
Advanced Crash and Safety Management (ACSM)
ECU OK, no Fault Code
Transmission Control:
Transmission / Getriebe GS 19
ECU OK, no Fault Code
Transmission / Getriebesteuerung
Fault: CAN message
Code: 55C5
Fault: CAN message
Code: 55D0
Fault: sorry, unknown fault
Code: CF61
Instrument cluster:
Instrument cluster / Kombiinstrument
Fault: CAN signal fault engine
Code: A3AD
Fault: CAN signal fault engine idle
Code: A3AE
Fault: CAN signal fault terminal
Code: A3B2
Fault: CAN signal fault ZV
Code: A3BB
Fault: sorry, unknown fault
Code: A558
Central info display / Zentrales Display
ECU OK, no Fault Code
Light/Rain Control:
Rain/light sensor / Regen-Lichtsensor RLS
ECU OK, no Fault Code
Heating / AC:
Air conditioning / Klimaanlage
ECU OK, no Fault Code
AC front / Front Klimaanlage
ECU OK, no Fault Code
Immobilizer System:
CAS
ECU OK, no Fault Code
Park distance control:
Sunroof / Roof:
Roof / Dach
ECU OK, no Fault Code
Audio/Navi/Communication:
Phone / Telefon
Fault: Ring break diagnosis error
Code: D690
HiFi-Verstaerker
ECU OK, no Fault Code
Tuner Antenna / Antenne
ECU OK, no Fault Code
Digital Satellite-Tuner USA
ECU OK, no Fault Code
Audio-System
ECU OK, no Fault Code
Seats:
Seats / Sitze
ECU OK, no Fault Code
Seats / Sitze
ECU OK, no Fault Code
Systems:
Junction Box Passenger / Beifahrer
ECU OK, no Fault Code
Tire pressure control / Reifendruck Kontrolle
ECU OK, no Fault Code
Passive Go System
Fault: no answer
Code: A0B7
Fault: no answer
Code: A0A7
Fault: no answer
Code: A097
Fault: no answer
Code: A0C7
Car Communication Computer CCC
ECU OK, no Fault Code
MASK
ECU OK, no Fault Code
Rear-Monitor / Rueckfahrkamera
Fault: sorry, unknown fault
Code: A81C
Fault: sorry, unknown fault
Code: A817
Fault: sorry, unknown fault
Code: A815
Fault: sorry, unknown fault
Code: A81A
Fault: sorry, unknown fault
Code: A81B
Fault: sorry, unknown fault
Code: A819
Car Communication
ECU OK, no Fault Code
Anti-theft alarm system:
Theft alarm / Diebstahl Warnanlage
ECU OK, no Fault Code
Chassis:
Body:
Fussraummodul /FRM
Fault: steering angle timeout
Code: E594
Other:

[ard]

Battery age? Correct battery for the car????

[Pierce330]

Originally Posted by ard

Battery age? Correct battery for the car????

That was my first thought as well...

[bgsquad]

Well the battery is AUG 2013.
Yesterday i replaced the spark plugs and a crankshaft position sensor (had a code once and went in limp mode).
So far so good, no stalling. need to test it more though.

[bgsquad]

STILL HOLDING!!! no stalling so far... the X is going strong, had a nice long trip to the mountains this weekend, and it was a blast to drive uphills

[Ron07x5]

Originally Posted by Pierce330

That was my first thought as well...

Seems to me everybody needs to get a digital voltmeter for the cigarette lighter and monitor the battery voltage. Low voltage=discharged battery and with discharged battery nothing can be trusted.

Can't wait to get the one off Amazon I have coming will be interesting to see voltage rise as alternator is charging (when?) and see the voltage at rest indicating battery charge level. Hook the battery tender to it and watch how it goes over time.

[bgsquad]

Or you can get a bluetooth OBDII and download the Torque application...

[Davidf]

Doesn't the 2008 3.0 engine utilize Valvetronic for the throttle duties? If so, cleaning the throttle body does absolutely nothing. The conventional throttle body is a backup device in the event the Valvetronic system fails. Under normal use, the throttle body is held wide open at all times.

Incidentally, my sons 2007 328i does the random stalling thing. Haven't figured it out yet as it only happens about once every couple of weeks.