|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Seized locking nut
Had the car serviced on the 22, which was a full inspection and brake fluid changed. On April 15th, I tried to remove the wheels to swap the winters for the summers and from one of the wheels, the locking bolt was so tight I could not remove it. All bolts were tighter than I expected, and as I have been swapping wheels for the last 10 years + every year for summer and winter season, I "know" how tight they are when I remove them. I assumed the dealer had overtightened the bolts during the service, so I just got them to deal with it. First of all, they stated that they NEVER remove wheels for any service, only when replacing pads. And secondly, they tried to present me with a bill of £223 for the pleasure of removing the nut. Two questions: - Has anyone ever had a seized locking bolt after 8 weeks of having wheels on. - Is it true that on a full inspection, the wheels are never removed. As the bill for this was excessive, I want to see if I can "prove" that they should have removed the wheel as part of the service (i.e. if they have not, they did not follow the schedule and I have them on that point), or if they change their story that they do remove them - that they will have overtightened it. |
Sponsored Links | |
|
#2
|
|||
|
|||
When you gave it to the dealer did they have you sign a work order with an estimate? How much was that estimate? Does the law work the same in the UK as the US?
Dealer "full inspection" is a joke.... usually a cursory look. They can measure pads from with a mirror/from the inside. |
#3
|
|||
|
|||
No, I have a service pack with the car so the services are included for 5 years for a single payment when I bought the car - so no signing or estimate required.
|
#4
|
|||
|
|||
Hopefully it was just seized and not some highschool dropout with an ASI patch on a greasy blue shirt decided to put the nut in the impact gun and then jam it in. Buffet used it in a different context, but even in this case: "When you combine ignorance and leverage, you get some pretty interesting results"
To avoid future issues, I'd put some lube on the nuts and antiseize on the hub. Make life simple when you're on the side of the road fixing a flat. |
#5
|
|||
|
|||
I don't see any way to do a brake fluid without removing the wheels. It's not impossible, just a hassle. So I bet dealer must have removed it.
Sent from my iPhone using Tapatalk
__________________
01' 3.0i E53 (M54) with 164,000 miles 07' 3.0si E83 (N52) with 134,000 miles 08' 3.0si E70 (N52) with 91,000 miles |
#6
|
|||
|
|||
I've done it. The bleeder screw is on the inside of the caliper.
|
#7
|
|||
|
|||
I always put copper grease on the hub to avoid the sticking there, I don't put it on the bolts though as my understanding was that it would affect the torque values.
For now I have removed the locking nuts to avoid this in the future, but still feel "had over" by the dealer though. |
#8
|
|||
|
|||
I had a similar issue when the dealer replaced my tires on the 135. 2 guys standing on the end of a wrench wasnt breaking it loose. I brought it back in to the dealer and it was confirmed that they were torqued way too damn tight. They had to break off two of the lugs to get them off. Chewed the shit out of the wheels and resurfaced them free of charge. Someone was a little over zealous with their impact. Hence why I dont use an impact to tighten wheels, just a good 'ol fashioned lug wrench tighten while its up and then tighten when its back down. NEVER had an issue. I also am fed up with locking lugs. I tore them off the X5 the second I bought it. If you are stupid enough to steal the wheels off of a 5000 lb SUV then have at it. I have insurance.
__________________
2010 X5 3.0 X-drive Titanium Silver/Black 2018 Ford F-150 Platinum Crew 2010 528xi (His) 2017 M2 Manual (His) Former Headaches: 2008 X5 RIP 2015 M235 2013 135is 2009 535xi Wagon (JUNK) 2007 530xi 6spd CPO Sport (Best Damn Car EVER) 2011 335xi M-sport Coupe 6spd (Sex on Wheels) 2010 550GT "CPO" (Junk) 2012 X5 35d "CPO" (More Junk) 2004 330i ZHP Sedan 2002 325xi Wagon 2000 323i Sedan 1998 M3 Sedan 1992 325i Sedan |
#9
|
||||
|
||||
It could have seized. Just because it never has doesn't mean it never could. They don't need to remove the wheels to do brake fluid. Sounds like you need a larger breaker bar in your collection.
__________________
03 3.0i mt 89 325is |
#10
|
|||
|
|||
The bar was not a problem, the breaker bar broke the locking nut in the end.
I went to a tyre place as well, even with any of their tools they could not remove it. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|