|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Quote:
Also researching batteries to work out if there is a problem there that is causing a little flurry of errors that are remaining: Particle filter system (004667) Glow plug Cylinder 1 (004212) Fuel filter heater control (004B1C) Computer CCC Message Failure (00E18F) While driving on the highway the battery voltage was around 14.1-14.2V. This morning before starting I noted the battery was at 12.4V, then immediately 14.9V after starting. (Then I assume drops to low 14s after driving a while?) The car is otherwise running great. Starts first time, every time, no rough idling at any stage. |
|
#2
|
|||
|
|||
|
Quote:
But when I read multiple people with single glow plug faults and a bad controller, I start thinking "huh, maybe a bad module CAN manifest as a single plug fault" or maybe the plug went bad, took out that channel of the controller? To be 100% clear, I have no idea how BMW has engineered the glow plugs or controllers.... |
|
#3
|
|||
|
|||
|
Quote:
That would make me feel better in a way - after having all the glow plugs replaced only 6 months ago - I'd be concerned if something was causing them to fail so prematurely. The error codes all seem intermittent - after clearing, some will now stay cleared and come back a few trips later. I'm now wondering if all these error codes have been intermittent for a while and I'm just picking up on them now after getting the Carly app... |
![]() |
| Bookmarks |
|
|
|
|