X5 under hood cowl gasket mounting question

[Rbmn9529]

Good afternoon, the first photo shows the cowl gasket I removed , it was only attached by the ends, there was no apparent support in the middle to keep it flush to the hood when closed. There are two screws that go through the gasket bracket that don't seem to have a place to insert in the partition, which is the second picture. Am I missing something? There has to be a place where the gasket bracket fastens to keep it flush with the hood? I have checked REALOEM and can't find the part anywhere. Thanks!

[Rbmn9529]

Just realized that the two middle plastic fasteners on the cabin filter cover have nothing to attach to. There must be something missing from my center partition, but I can't see it on the part in REALOEM.

[Socale39]

Those panels are completely broken and you need to replace them all. see my video below:

https://youtu.be/Lc4JdLk1fXg

[Rbmn9529]

Wow, that is great, you are even dressed nicely!. Thank you, great production!

[crystalworks]

Originally Posted by Socale39

Those panels are completely broken and you need to replace them all. see my video below:

https://youtu.be/Lc4JdLk1fXg

Thanks for posting, and for the video. Just checked out newly acquired 2010 x35d and sure enough... both outboard trims are broken and it's missing the center one all together. These are not cheap though.

[Socale39]

Originally Posted by crystalworks

Thanks for posting, and for the video. Just checked out newly acquired 2010 x35d and sure enough... both outboard trims are broken and it's missing the center one all together. These are not cheap though.

Crystalworks,
Looks like you might be local to me. I relocated to San Antonio just a few months ago. If you ever need a reset of your service intervals or looking to do some coding, let me know. I just coded a few options myself.

[Rbmn9529]

Originally Posted by crystalworks

Thanks for posting, and for the video. Just checked out newly acquired 2010 x35d and sure enough... both outboard trims are broken and it's missing the center one all together. These are not cheap though.

I got my 3 pieces through ECSTuning, $156 shipped total. My hood Seal and other parts were in good shape

[crystalworks]

Originally Posted by Socale39

Crystalworks,
Looks like you might be local to me. I relocated to San Antonio just a few months ago. If you ever need a reset of your service intervals or looking to do some coding, let me know. I just coded a few options myself.

Thanks, might take you up on that. I have Carly and can do some coding but nothing major. Plus they keep adding stuff but of course adding cost too like registering batteries.

Originally Posted by Rbmn9529

I got my 3 pieces through ECSTuning, $156 shipped total. My hood Seal and other parts were in good shape

Yeah, I just saw they had them for that. FCP was at $206ish... I'll save the $50. Thanks for the heads up.

[Stockx5]

Originally Posted by crystalworks

Thanks, might take you up on that. I have Carly and can do some coding but nothing major. Plus they keep adding stuff but of course adding cost too like registering batteries.



Yeah, I just saw they had them for that. FCP was at $206ish... I'll save the $50. Thanks for the heads up.

I bought all 3 pieces off ebay for 57.94

they are exactly the same except the left and right pieces do not come with the foam gasket so you have to reuse the ones from your OEM part.

I figured there is no mystery to it just a plastic mold and since the OEM already tends to break, there is nothing to be lost trying an after market part.

[Thecastle]

The engine partition craps out on every e70 I've seen. I've replaced it on both my x5s. Easy to do. Sometimes a 4th piece dies, which is under these.

The plastic is of extremely crappy quality, it falls a part in your hands,