Bought the rebuild kit from FCP. To my surprise the kit doesn't come with new piston.
I also replaced both rotors and pads with Zimmerman and Textar pads.
Caliper rebuild process is not too bad.
I used the brake system to push the piston out. It was a mess but doable then I pinched the brake hose with a vice grip to stop fluid leaking out while replacing o-ring and seal.
The piston had a little rust spot, I sanded it smooth using 400 and 1000 grid wet sand paper.
Glad to have my ride back this morning.
01-14-2019, 10:01 AM
Linear Mode
