07 4.8 trans fail after fluid/filter service

[MarcusE92]

I also wanted to add that when other people stated trans failsafe mode they were able to drive the car. When i put it into drive or reverse and press the gas it does nothing. Could i have an issue with the throttle body?!?!

[smassey321]

Originally Posted by MarcusE92

I also wanted to add that when other people stated trans failsafe mode they were able to drive the car. When i put it into drive or reverse and press the gas it does nothing. Could i have an issue with the throttle body?!?!

Have you checked for bent pins on the trans side of the plug? And your codes are not BMW codes. You may want to scan with something that can get you BMW codes.

[MarcusE92]

Originally Posted by smassey321

Have you checked for bent pins on the trans side of the plug? And your codes are not BMW codes. You may want to scan with something that can get you BMW codes.

Im using foxwell nt510

[ard]

Originally Posted by smassey321

Have you checked for bent pins on the trans side of the plug? And your codes are not BMW codes. You may want to scan with something that can get you BMW codes.

if you google BMW 2DCA bent pin...guess what?




good call, lets see if it was right.