|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
01-18-2025, 10:26 AM
|
|||
|
|||
|
002A99 DME Crankshaft exhaust camshaft, reference
Car runs fine but after about a 10 minutes starts squealing from the engine compartment and Carly shows the code above. I've also had a water pump code (replaced in 2023 w/thermostat) but that code hasn't recurred. Any ideas, CCV? Or something worse. Also, engine will idle rough. Appreciate Xoutpost! 
|
| Sponsored Links | |
|
|
|
|
#2
01-18-2025, 10:59 AM
|
|||
|
|||
|
squealing together with the camshaft code is not good. Has there been any work done on the cam/lifters?? If that all fits together then very possible someone installed the cam without using the special tools to align the bearing bores. You might try leaving the oil cap off and see what comes out for sound/smoke.
__________________
1988 325is (purchased new) sold 2004 X5 3.0 2005 X3 2.5 2008 X5 3.0 (new to me)
|
|
#4
01-18-2025, 01:12 PM
|
|||
|
|||
|
Use a piece of hose with one end in your ear to see if you can trace were the sound is coming from.
Clearing the code and getting a proper scan tool might be a good idea as well.
__________________
1988 325is (purchased new) sold 2004 X5 3.0 2005 X3 2.5 2008 X5 3.0 (new to me) Last edited by 80stech; 01-18-2025 at 01:41 PM.
|
|
#9
01-21-2025, 07:57 PM
|
|||
|
|||
|
Were you able to hear where the sound is coming from? Did you get something better to read the codes?
__________________
1988 325is (purchased new) sold 2004 X5 3.0 2005 X3 2.5 2008 X5 3.0 (new to me)
|
|
#10
01-21-2025, 08:05 PM
|
|||
|
|||
|
Not able to attach screenshots or video. Codes are A6F3 Not Present coding data CRC error and P13B6 Pending Crankshaft / 'B' Camshaft Reference Error (Bank 1). Also had to add a quart of oil, it was at minimum.
|
|
| Bookmarks |
|
|
|
|
Linear Mode
