Crank but No Start Help

[jmn]

Hi there, using this thread as I got the exact same issue but with the new control module (EKPS). E70 35i 2013 N55

After a long drive, motor stopped.
Following by cranks but no start.
After investigation, realized that pump was out of order (no rotation), changed today with a new one, it works.
I have been able to test it manually (plugged to 12V powertank) and I have the fuel coming out to feed the high pressure pump (can share more details on that test if needed).

However, when I open my doors, try to start or anything, I can't hear the pump running. Resulting in crank and no start.

I tried to manually run the pump while starting. It works just fine, no crank, engine doesn't stop (tried for only 2 min but still).

I have few questions that I am trying to solve now:
1- Could it be the EKPM3 (7276046)?
2- How can I isolate it? (I would like to avoid spending more money if this is because another reason)
3- Can I test the module myself? If we confirm that I need to change the relay, is a coding mandatory? can I get any EPKM3? Should I get a E70 specific?

Many thanks!

[jmn]

Checked the fuse 105 again and had to replace it.
Car seems to run perfectly now

Thanks for this forum for www.newtis.info/ !