Can't hear turbo, vacuum issue?

[Bluefish7]

Thanks, it definitely moves quickly. The boost values I can read are:

Basic boost pressure setpoint value ( low-pressure stage ) (hPa)
Boost pressure - value before correction (kPa)
Boost pressure control of the manipulated variable (%)
Boost pressure plate actual position of the sensor characteristic (%)
Boost pressure plate raw actual position (%)
Boost pressure plate target duty ratio (%)

Also I recently replaced the tstat and water pump, DPF cleaned itself out, not sure if related but seems coincidental and concerned that maybe I cut a vacuum hose, they don't look good but I figured I would get a code if that was really the case.