E70 - INPA MISSING TRANSMISSION OPTIONS!

[mejim707]

I want to reset the transmission adaptations after some recent work. I have INPA 5.0.1 and 5.0.6. I tried both. Currently I only have 5.0.6 installed and communicating with the car.

However, I select my chassis -> transmission type but the option for "F6 Activate -> Reset Adaptation" is not preset. In fact F3, F6 and F7 are not present and I cannot find the reset adaptation option anywhere under transmission options. Again, INPA is communicating with the car and will read in data but there simply doesn't seem to be this reset option anywhere.

Has anyone else run into this issue on the E70 X5? Do you have any suggestions on getting this to work? Would this reset option be located under engine modules instead? I'm at a loss so any assistance would be fantastic!

Incidentally, I installed INPA 5.0.6 form Mikes Easy install and the cable is form here -> https://www.amazon.com/gp/product/B07L498NGZ . I have the cable switch set all the way to the left but I've tried the other 3 selections as well. The car is also set to accessory but not turned on.

Thanks!

Transmission / Car selection


As you can see, there is no clear option to navigate to adaptation resets


However, you can see here that I can communicate since I read in error data. Only 1 error present form around 50k mikes. The car has 250k now.