|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
2008 3.0SD - Driveshaft popped out
After i parked it i looked under the front and there hangs the left front axle with the boot on the transfercase side. My first thought was how the hell did this happen - then i remembered that i have read about alot of axle problems on the newer LCI models. How hard is it to assemble this back together again? |
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
2008 3.0SD - Driveshaft popped out
Usually happens because the axle was not completely engaged into the differential.
Shows up about once a year on xoutpost. I always to a test fit without the c clip to determine how far in is 100% then redo with the c clip in.
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
|
#3
|
|||
|
|||
|
Its the tripodhub that slip out of the collar on the inner cv joint part thats into the transfer case. I now lost a bearing/roller wheel on that tripod and seems like i have to replace the complete axle to get it proper..
|
|
#4
|
|||
|
|||
|
Did it 'slip out' or did the joint fail?
Hope it is sorted by now... |
![]() |
| Bookmarks |
|
|
|
|