2008 3.0 oil quanity

[motordavid]

Redhorese,
Your question has come up before and it took some serious digging
to find the solution, (see four page thread linked; worth a read.)

The 4.8 capacity seems to be pretty well nailed down at 8.5 qts;
the 3.0 capacity less so, though I would bet it takes the 7.9/8.0
qts that all the X5 3.0 engines have taken throughout the series.

And, you are correct: in the E70 "manual" written with Biff&Buffy in
mind, there is no oil fill capacity. My E53 3.0 has always taken 8 qts
after a long drain; imo, your E70 3.0 will too.
GL,mD

E70 Oil capacity Thread: http://www.xoutpost.com/x5-e70-forum/...0+Oil+Capacity

PS/Edit...if you remain unsure/unconvinced I would hope one of the genius techs at your local stlr,
has the answer; maybe not the "SA", but a tech should be able to recite it off top of his head.

[AzNMpower32]

Attached is the official bulletin from BMW TIS stating the oil capacity. Indeed for the N52 & N54 motors, the capacity is 6,5 litres.

[pokemon]

6.9 US qts is the factory spec. 7qts will do since you can't drain all the oil from the bottles anyway. My owner's manual tells me how much WWF it holds and gasoline, it tells nothing about oil amount.

[REDHORSE]

thnaks to motordavid&aznmpower32 for solid info on the correct oil qty for
my x5 3.0 n52..6.5L works..put on 542mil this past weekend(L.V. NEV)
oil qty sceen say 'full'. i did not change the oil filter and put in 6qt.
i did compute a gas milege increase(using BMW 5w30)from around 18.3ave
to 20.9 for 542.5miles total..note=zero oil consumption 11,500mil.
>>anyone know how to remove the air input hose that covers the oil filter???

[reblux5]

BMW will change your oil and filter, annually, at no charge if you haven't reached 12,000 miles a year.