|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
02-19-2011, 04:32 PM
|
|||
|
|||
|
Hi Guys
I recently retrofitted CIC to a 2008 e70 & same as you had only PDC audio, I fitted the later JBE & extended the cables from the old PDC unit to the JBE. I then changed the build date of the car in NCS to 10/09 & recoded the JBE & RPDC, I now get the picture displaying correctly but no audio. I have also recoded the CIC again & the IHKA for the PDC button to work correctly but cant get any beeps! I can change the volume of the beeps in the CIC ok though. Is there any specific coding that has to be done? If I put the old PDC on & plug the sensors back into it the audio comes back Any input greatly appreciated Jase 
|
|
#2
02-19-2011, 04:45 PM
|
|||
|
|||
|
You mostly correct in your steps, but I am not sure if you had coded all the modules required. I think you might be missing some steps. Probably the best would be to contact with the bimmer retrofit guys
 they will definatelly help
__________________
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Hybrid Mode
