|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Removing front centre air vent
Thanking you in advance. |
Sponsored Links | |
|
#2
|
|||
|
|||
Looks like I'm the only one with this issue. Never mind, I'll bring it into the local dealer.
|
#3
|
|||
|
|||
Same problem here. It's covered under the warranty.
__________________
2007 Black Metallic 3.0si, 20" Y Spokes, Tech, Prem, Running Boards, fender flares, 20% tint |
#4
|
|||
|
|||
Hi Nokmate,
I have removed the front vent, when installing a tv in motion lead, The vent is just clipped in (no screws) just pull it from the bottom of the vent and it will just pull away. Hope this helps. Carl996 |
#5
|
|||
|
|||
Thanks Carl. Did you remove the wood trim under the vent first? I opened the glove box and tried to remove it from that end. However it felt that just the front plate was coming off instead on the whole vent assembly.
|
#6
|
|||
|
|||
Hi Nokmate, The vent and the bottom trim (including the glove box switch) are one unit, If you just get your fingers under the trim you will feel it start to come away.....It then just pull's out.
If you still have problems I will post some pictures...Tonite.. Carl996 |
#7
|
|||
|
|||
I will be eternally grateful if you could. I don't really want to break anything.
I would also be interested your experience with the installation of the TV cable. It is highly annoying having a tv which only works when the car is in Park. Thanks. |
#8
|
|||
|
|||
Hi Nokmate
Hope you find these useful, Just put your fingers at the bottom of the trim underneath the vent. It will feel a little bit tight at first but trust me it come away. Once you have pulled it away there are (i think ) 3 connection that just unplug and you can remove the vent completely. The connections cannot be mixed as they are all different sizes. I did fit a tv in motion lead but it has a fault on it. I am currently waiting for a replacement once it arrives and is working ok I will drop you line. regards Carl996 |
#9
|
|||
|
|||
Hi Carl,
Thank you very much. I will have a go at it tomorrow when there is more light. Would appreciate any advice on the tv thing once you get it sorted as well. Thanks. |
#10
|
|||
|
|||
I removed the central vent assembly this weekend and managed to reinstall the tab. Just like you said, it came out without any problems. Thanks you verty much for your advice.
Would appreciate any comments you have when you get the TV in Montion cable working. |
Bookmarks |
|
|
|