Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E70) Forum
How to access foglamps with ACS bumper? How to access foglamps with ACS bumper?
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-11-2009, 08:36 PM
1SIKCAB's Avatar
Member
  
Join Date: May 2009
Location: San Marino, Calif.
Posts: 31
1SIKCAB is on a distinguished road
How to access foglamps with ACS bumper?
I looked at the DIY section which was very informative, and would have been helpful IF the grill section on my ACS bumper wasn't completely sealed. Is the other way to access the foglamps through the fender well? Also need the same access points to change out the reflector as well. Any help/suggestions would be appreciated.



Changed the AE bulbs out today with the PT Thunder bulbs, and look remarkably better!
Last edited by 1SIKCAB; 05-11-2009 at 08:48 PM.
Reply With Quote

Sponsored Links

  #2  
Old 05-11-2009, 09:08 PM
rh71's Avatar
Member
  
Join Date: May 2007
Location: LI | NY
Posts: 3,924
rh71 is on a distinguished road
follow the 2nd half of the instructions from here where he talks about the left side and you should be golden.
__________________
'08 X5 3.0si - Alpine White / Saddle Brown interior
Specs: Sport Pkg, Premium Pkg, Tech Pkg, Comfort Access, Aero Kit, Style 433 staggered 20s on Conti DWS
Mods: Carbon 35 tint, LED angel eyes, GP Thunder 7500k fogs, H&R 20mm/25mm spacers, clear reflectors, gunsmoke-tinted taillights
Coded: Digital speedo, windows/sunroof/tailgate close via keyfob

X5 pics at Flickr
Reply With Quote
  #3  
Old 05-12-2009, 10:22 PM
1SIKCAB's Avatar
Member
  
Join Date: May 2009
Location: San Marino, Calif.
Posts: 31
1SIKCAB is on a distinguished road
Thanks! Will do.
Reply With Quote
  #4  
Old 05-14-2009, 02:23 PM
1SIKCAB's Avatar
Member
  
Join Date: May 2009
Location: San Marino, Calif.
Posts: 31
1SIKCAB is on a distinguished road
Quote:
Originally Posted by rh71 View Post
follow the 2nd half of the instructions from here where he talks about the left side and you should be golden.
I was already to change out my fog light bulbs when I realized....the ACS bumper is a single molded piece! Any other suggestions?
Reply With Quote
  #5  
Old 05-14-2009, 02:36 PM
rh71's Avatar
Member
  
Join Date: May 2007
Location: LI | NY
Posts: 3,924
rh71 is on a distinguished road
Quote:
Originally Posted by 1SIKCAB View Post
I was already to change out my fog light bulbs when I realized....the ACS bumper is a single molded piece! Any other suggestions?
not sure what you mean here... did you get to the reflectors as in the link? To change out the fog bulb you get to it from the inside... same area you have access to the reflectors. If you can reach further in to where the fogs are, the bulb and its housing is there and you twist it off then replace.
__________________
'08 X5 3.0si - Alpine White / Saddle Brown interior
Specs: Sport Pkg, Premium Pkg, Tech Pkg, Comfort Access, Aero Kit, Style 433 staggered 20s on Conti DWS
Mods: Carbon 35 tint, LED angel eyes, GP Thunder 7500k fogs, H&R 20mm/25mm spacers, clear reflectors, gunsmoke-tinted taillights
Coded: Digital speedo, windows/sunroof/tailgate close via keyfob

X5 pics at Flickr
Reply With Quote
  #6  
Old 05-14-2009, 11:38 PM
1SIKCAB's Avatar
Member
  
Join Date: May 2009
Location: San Marino, Calif.
Posts: 31
1SIKCAB is on a distinguished road
Quote:
Originally Posted by rh71 View Post
not sure what you mean here... did you get to the reflectors as in the link? To change out the fog bulb you get to it from the inside... same area you have access to the reflectors. If you can reach further in to where the fogs are, the bulb and its housing is there and you twist it off then replace.
Yes, got the clear reflectors and wanted to change them along with the fog lamp bulbs at the same time as it is in the same area. Problem is that my front bumper is 1 single peice and does not seperate like the one in the DIY photo. Anybody out there with an aftermarket 1 peice bumper run into this problem?
Reply With Quote
  #7  
Old 05-15-2009, 12:15 AM
rh71's Avatar
Member
  
Join Date: May 2007
Location: LI | NY
Posts: 3,924
rh71 is on a distinguished road
^ I see what you mean now, sorry - good luck.
__________________
'08 X5 3.0si - Alpine White / Saddle Brown interior
Specs: Sport Pkg, Premium Pkg, Tech Pkg, Comfort Access, Aero Kit, Style 433 staggered 20s on Conti DWS
Mods: Carbon 35 tint, LED angel eyes, GP Thunder 7500k fogs, H&R 20mm/25mm spacers, clear reflectors, gunsmoke-tinted taillights
Coded: Digital speedo, windows/sunroof/tailgate close via keyfob

X5 pics at Flickr
Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Xoutpost - Sponsors - Archive - Top

All times are GMT -4. The time now is 01:40 AM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.