|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#18
02-11-2017, 03:05 PM
|
|||
|
|||
|
So, I told you before I should not have messed with the sealing sleeve (it wasn't leaking to begin with, but I like preventive maintenance).
I have the new pan on, I have fluid in the trans (1st cold fill), but when I went to start the car and run it in, it won't start because it shows a trans malfunction. First thing I looked at was the plug going into the mechatronics sleeve. Of course.... it's loose. It did not fully seat. And other than trying to have my 14 year old twist the plug while pushing it foward to find the tab to line up with the male side of the mechatronics plud inside the trans, I don't know what else to do. I cannot fit my hand up there fully to be able to manipulate the plug into place. He gets $75 if he can do it, but I'm betting I'm calling Brothers Auto in Indian Trail on Monday to have them seat the plug and finish filling my trans for me with the Lifegaurd 6 I have. Flatbed won't be too expensive I guess. At least I got THAT going for me and there is 3 litres of oil in the trans so I won't worry about them pulling it onto the bed.
__________________
2016 X5 SDrive 35i Sport 2009 X5 XDrive30 Sport acquired 10/21/16 "Brigette" 2005 530i Sport acquired 5/2014 (wife traded for a milktoast Honda) 1999 528i Sport (306k miles!!) acquired 8/2006 "Prescilla" (sold) 1997 528i acquired 8/2004, "Helga" parted out and gone 1992 735iL acquired 6/2003, "Wanda" sold 
|
| Bookmarks |
|
|
|
|
Threaded Mode
