Successfully coded my E70

[JBF]

Originally Posted by blue dragon

You cannot extract 1b with the swid reader with kcan cable, you need enet cable.
Cars that were equipped with CIC should have enet pinouts, but if you did a retro, you will need to add those.

Yes I know about KCAN.

So if I have an ENET cable I can just plug it in, set my laptop IP address to 160.48.199.98/255.255.255.128 and then FTP to CIC on 160.48.199.99?

I ask because if this is the case I will take apart and old ODB cable and make myself an ENET cable. If not then I'll order a supported USB network adapter to plug in the glovebox.

My CIC is factory fitted. Some people suggest an ENET cable is only useful for F-series cars.