Successfully coded my E70

[blue dragon]

Its already in that thread, there is a pdf guide on using the INPA and NCSEXPER software.

The list of values that you change is below, along with the modules that you have to change them in.

================================================== ==============

Disable Sidemarker
FRM Module
SIDEMARKER_US
nicht_aktiv

================================================== ==============

Double Blink Hazards (some thing cool looking)
FRM Module
DOPPELBLINKIMPULS_WARNBLK
aktiv

================================================== ==============

Key fob remote mirror close (this has a dependency with remote window close, for this to work i thing remote window close should be coded as well)
FRM Module

ASP_KOMFORT_EINKLAPP (MY09-11)
aktiv
SPIEGEL_KOMFORT_EINKLAPP (MY07-08)
aktiv

================================================== ==============

Fog lights with Highbeam on

FRM Module
FL_UND_NSW_NICHT_GLEICHZ
nicht_aktiv
Fog lights with Highbeam Flash
LH_UND_NSW_NICHT_GLEICHZ
nicht_aktiv

================================================== ==============

Key fob Windows UP when press and hold the lock button

CAS Module

KOMFORTSCHLIESSUNG_FB (window up through key fob)
aktiv
KOMFORTSCHLIESSUNG_PA (window up through comfort access)
aktiv

================================================== ==============

Eject Keyfob with engine off - you have to HOLD the start/stop button. This in conjunction with the nest feature as well
Press and hold the start/stop button 1 second. Key will be released.

CAS

KOMFORT_EJECT
nicht_aktiv -> aktiv

at the same time it will Unlock doors when engine off/key ejected - as above, HOLD the start/stop button. I don't even press the park button. I come to a complete stop, then hold the start/stop button. It puts the car in park, ejects key (if its in there, i have CA), and unlocks door (no more 2-pull to open doors)

CAS

ER_KEYOUT_AUTOVR
nicht_aktiv -> aktiv

================================================== ==============

Remote trunk close (closing tailgate with key fob and button inside cabin)
HKL Module
SCH_FBD
aktiv
SCH_TOEHKI
aktiv
TASTER_FBD
aktiv

(I have not done it yet, it is on my list)
================================================== ==============

enable DVD in motion For CIC

frist you need to modify the CIC.xxx on line 17 and 18 from [03] to [FF] using data2txt and then code the following
CIC Module
VIDEO_NUR_MIT_HANDBREMSE
nicht_aktiv
SPEEDLOCK_X_KMH_MAX_C0E
3_kmh
SPEEDLOCK_X_KMH_MIN_C0E
3_kmh

(I have not done it yet, it is on my list)
================================================== ==============

V=Digital Speed (you will have to reset the time after)
KOMBI Module
BC_DIGITAL_V
aktiv

There is one more feature that i can not confirm but others report that the following arameter show the actual speed on the V= instead the same as the speed shows on the cluster
BC_DIGITAL_V_KORREKTUR (i did not do this one i only did BC digital_V)
aktiv

================================================== ==============
Instant MPG (Value is Not in 2011 E70, may be in other/older models this value is present)

KOMBI module
DIGITAL_KVA
aktiv

================================================== ==============
Disable iDrive Disclaimer

CIC Module
LEGAL_DISCLAIMER_TIME
kein_ld


================================================== ==============
Remove IDrive warning when starting the car. (this is for CCC units)

CAPPL

LEGAL_DISCL
aktiv -> nicht_aktiv

================================================== ==============

DVD in motion (I think this is for CCC units)


CAPPL

VIDEO_DENY_C0B
deny_stop_break -> deny_never

================================================== ==============