|
I forgot about this post. yes, I installed them a few weeks ago. Just the fronts though. The rear on mine is self leveling, so I used DIS to set a new ride height for the rear.
Install was pretty straightforward even with rental spring compressors.
The hard part was getting the top perch to line back up with the three holes. They're not equidistant, so there's only one way they can go back in.
Overall, since mine is the 4.8, it lowered about 1,75" in the front and I dialed in about 1.5" drop in the rear. I'll be getting it aligned at a shop tomorrow morning, then 12.5mm and 20mm spacers go on on the 4th.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
|
06-29-2012, 09:33 PM
Hybrid Mode
