Pre-LCI vs LCI Tail Bulbs...?

[zx45]

Originally Posted by tribecax5

Same here. I have a 2009. LCI tails look awesome. Took me about 20min to install.

Hello tribecax5, have you changed just the bulb or the entire lens assembly. Thanks.

[marshotel]

Originally Posted by zx45

Hello tribecax5, have you changed just the bulb or the entire lens assembly. Thanks.

It is the entire assembly, inner and outer.

[tribecax5]

Originally Posted by zx45

Hello tribecax5, have you changed just the bulb or the entire lens assembly. Thanks.

The whole thing. Part of the new tails (2011-13) are LED's.

[Hammer]

Did you have to do any coding to the OBC after the LCI upgrade? Or was a it a simple plug-n-play swap?

[marshotel]

Originally Posted by Hammer

Did you have to do any coding to the OBC after the LCI upgrade? Or was a it a simple plug-n-play swap?

I did the upgrade on my 2010. The lights work right away but you will get a bulb out warning on the dash until you get the car re coded.

[M5D]

That a great mod, but since my lenses are smoke it would not matter.

[Ninja]

Originally Posted by Hammer

Did you have to do any coding to the OBC after the LCI upgrade? Or was a it a simple plug-n-play swap?

Yes, you'd have to code the OBC after upgrading the taillights. The installation itself is very straight forward, only took me 15mins each to replace it.