Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E70) Forum
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Old 07-06-2015, 11:05 AM
Member
 
Join Date: Sep 2012
Location: philadelphia
Posts: 44
PHL08 is on a distinguished road
Quote:
Originally Posted by ard View Post
These would be the ones that set a CEL, actually I think just the first two.

One is an O2 sensor HEATER code, which means the wire to the O2 is disconnected or the fuse is blown or the sensor massively failed.

Check all connections to the O2 sensors- pop them apart and reconnect them.

Second code i2a99 is an exhaust camshaft correlation. Im guessing a camshaft position sensor? The other issue can be a sluggish VANOS solenoid. Usually due to fouling of the solenoid due to BMWs horrific oil change intervals. Pop them out, flush/clean them, replace Orings.... at least on E39s.

Last one I dunno- seems like a battery issue. How old is you battery? Any charging/voltage issues?
Updating the thread...I finally replaced the sensor. It was the pre-cat, bank 2 sensor. Nothing else. Engine light stayed off after the replacement, and none of the prior codes have come back.

But this is not an easy DIY for this model car (2008 E70). It's extremely difficult to get to the pre cat 2nd bank (rear) O2 sensor, and even more difficult to get the wire routed to the plug because it goes around the back of the engine. Looking down at the engine, the sensors are on the left down under the spark plugs. You can see the bank 1 pre-cat sensor fairly easily. The bank 2 sensor is under a shield that has to be removed. The wiring from the probes goes around the rear of the engine to the connectors on the rear right side (looking down at the engine and into the back with a flashlight).

I had the car in an indy shop for front left suspension work and provided the mechanic the probe to install for me. He did it in about an hour, and that was because he had a lift to jack the car up over his head so he could easier get to the wiring. But not after he had to remove most of the components on top of the engine and around the firewall to also get to the probe and connectors.

Probe was about $130. His labor was another $100'ish. Money well spent because I would have been cussing and swearing every second I was trying to do that myself.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 01:50 AM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.