M dead pedal on a non M X5

[Singh97]

I have not seen any thread about it so I wanted to have one out.
How many of you have swapped out the dead pedal (footrest) on a non M X5 to the one that comes on X5 M and M-Sport models. IMO The plastic deadpedal looks cheap. Moreover I have already swapped out my brake and accelerator pedal to OEM BMW aluminum pedal and those will go better with BMW aluminum M dead pedal.
(Picture on the right is how my pedals look at this point.)

I am going to do this mod but just wanted to see if somebody has done it already. I do see people have done it on e90 (can be seen here: http://www.e90post.com/forums/showth...d+pedal&page=2). But the problem was that when you rip the OEM footrest off the floor you will break all 4 tabs because it was on really really really tight, and whatever broke off fell into the holes. Now you will have 4 holes in the carpet, and the underside of the new M dead pedal has only hollow tubes molded into it and no anchor, and the holes do not bite the tubes.

[cmyX6go]

I have put these on my previous Xs. I now have the same brake and gas pedals on the M but don't like the way they look with the M dead pedal. I liked it better when all three matched.

I never took off the original dead pedal, just drilled the aluminum one on top of the existing one. Not sure if you can do the same with the M pedal.


I was too lazy to search for my own pic

http://www.xoutpost.com/bmw-sav-foru...um-pedals.html

[Price]

I believe it's just glued there, so you'll have to apply brute force, but no holes afterwards.