|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
06-07-2017, 11:18 AM
|
||||
|
||||
|
Error codes no 4x4 error need help plz.
Ok, so after a while fighting with the ISTA+ software, I was finally able to get it running. Here are the errors I got. Can anyone chime in if you have an idea of what can be causing the problem? Read somewhere that maybe the plastic gear in the transfer case can be causing the 4x4 error. Any ideas are appreciated. Thanks.
__________________
2011 BMW X5 35d Deep Sea Blue Metallic w/ 3rd row Custom Kicker Audio System Style 259's on Dunlop Sport Maxx Run Flat Tune and Exhaust Coming Soon.... 05' Ram SLT 2500 5.9l Cummins (Gone But Not Forgotten) 2008 BMW X5 3.0si Alpine White III (Sold) 2002 BMW X5 3.0 TitanSilber Metallic 
|
|
#2
06-11-2017, 12:07 PM
|
|||
|
|||
|
I'm no expert but can help a little. You need to have the ignition on when running the vehicle test or you get bogus error messages. So first you should "delete fault memory" and then re-run the vehicle test with the ignition on.
Then, you can select a fault and hit "calculate test plan" and it will walk you through troubleshooting. VTG: Oil Wear on my E53 required simply a transfer case fluid change and code reset. Good luck!
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
