35d: adding crankcase breather oil separator

[daytonatrbo]

@ZetaTre,

When I made comments about trying to offer the plate, I did not realize you had already started a thread gaging interest. If you are still pursuing that, I will gladly cease and desist with my offers.

[Thirdy]

Originally Posted by daytonatrbo

@ZetaTre,

When I made comments about trying to offer the plate, I did not realize you had already started a thread gaging interest. If you are still pursuing that, I will gladly cease and desist with my offers.

I tried to message him about the plate one time and he didn't reply back. So I guess he didn't push through with the project or only made a few plates.

But in case you will have one built, make it two I will buy the other one

[daytonatrbo]

Originally Posted by Thirdy

I tried to message him about the plate one time and he didn't reply back. So I guess he didn't push through with the project or only made a few plates.

But in case you will have one built, make it two I will buy the other one

Ok. I need to order in the pent-screw bits so I can take it off safely. Then I need to get drawings made and send them to my guy to quote.

[josiahg52]

Am I to understand that these pieces:

RealOEM.com - Online BMW Parts Catalog

cannot be reinstalled after this mod? Or do they require modification themselves to fit?

[daytonatrbo]

Originally Posted by josiahg52

Am I to understand that these pieces:

RealOEM.com - Online BMW Parts Catalog

cannot be reinstalled after this mod? Or do they require modification themselves to fit?

Modification to item 6 only I believe.

[Socale39]

You can count me in for a plate as well. Someone should just make a full kit available.

[daytonatrbo]

Originally Posted by Socale39

Someone should just make a full kit available.

That becomes a rather large outlay to only sell a small handful of kits.