|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
01-23-2015, 11:48 AM
|
|||
|
|||
|
Any Front wheel bearing removal/replacement DIY?
Any Front wheel bearing removal/replacement DIY?
__________________
“Life is not a journey to the grave with the intention to arrive safely in a pretty and well-preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming: Wow!! What a ride!” 
|
|
#2
01-23-2015, 01:51 PM
|
|||
|
|||
|
Check this video out for passenger side axle removal as a prerequisite for yanking the wheel bearings.
https://www.youtube.com/watch?v=-TCe1Cc4KGk I will tell you, though. I attempted axle extraction last night and I bent a good pry bar trying to loosen the axle nut. Suffice it to say, my nuts are on real good.
|
|
#3
01-23-2015, 02:14 PM
|
|||
|
|||
|
I found some removal vids, however I'm concerned about putting the hub back on without the BMW tool.
TIA
__________________
“Life is not a journey to the grave with the intention to arrive safely in a pretty and well-preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming: Wow!! What a ride!”
|
|
#4
02-06-2015, 04:33 PM
|
|||
|
|||
|
looking for part number just for the bearing not the hub and bearing.
And trying to confirm Torque for the retaining nut on the axle to hold the hub and bearing on. I think 310 ft-lbs seems excessive.
__________________
“Life is not a journey to the grave with the intention to arrive safely in a pretty and well-preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming: Wow!! What a ride!”
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
